1300 774 662

Amsoil Synthetic Lubricants

Introduction

amsoil_20logo

Enginecare Systems are the proud Australian and Sth Pacific Island distributors for AMSOIL synthetic lubricating oils and filtration systems. Just give us a call on 1300 774 662 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it to make an inquiry.

Products

AMSOIL FORMULATES A WIDE SELECTION OF SYNTHETIC LUBRICATING OILS for all types of engine and gear applications, including those for specialized vehicles and severe operating conditions. In addition, AMSOIL has developed sophisticated fuel additives, filtration systems and other companion products that supplement and extend lubricant performance. This complete line of quality products is recognized by countless private motorists, fleet managers and industrial administrators as the best and most cost-effective choice for increasing engine performance, reducing maintenance and prolonging vehicle and equipment life. ...making history with synthetics

The Company of Firsts

AMSOIL has a documented history of innovation and leadership.

First to develop an API-rated 100 percent synthetic motor oil.
First to introduce the concept of "extended drain intervals" with a recommended 25,000-mile/1-year drain interval.
First U.S. company to utilize the NOACK volatility test as a standard of performance excellence.
First to produce synthetic motor oils for diesel engines, racing engines, turbo and marine engines.
First to introduce synthetic oils that legitimately contribute to improving fuel efficiency.
First to manufacture synthetic gear lube for automotive use.
First to manufacture a 100:1 pre-mix synthetic 2-cycle oil.
First to manufacture a synthetic automatic transmission fluid for automotive use.

History

As a jet fighter squadron commander LIEUTENANT COLONEL ALBERT J. AMATUZIOhad ample opportunity to witness synthetic lubricants in action. These oils are used exclusively in jet engines because of three extraordinary performance characteristics: an ability to reduce friction and wear on engine components, an ability to function dependably at severe temperature extremes and an ability to withstand rigorous and lengthy engine operation without chemical breakdown.

aj_amatuzio_02_zoom Recognising that these same benefits would prove invaluable in combustion engines, Al Amatuzio formulated the first synthetic motor oil in the world to meet API service requirements for automobile engines. The new lubricant performed like no other before it. When the first can of AMSOIL 10W-40 appeared on the market in 1972, it signaled the birth of an entire industry. AMSOIL synthetic lubricants have expanded the boundaries of lubrication science and redefined the performance possibilities of modern machinery and engines.

AMSOIL INC. was founded on Al Amatuzio’s desire for technical innovation, his commitment to high quality and his belief that consumers would respond to a superior product. The company has remained true to these ideals; its history is a checklist of revolutionary products that have withstood the tests of time. As the pioneer corporation in the field of synthetic lubrication, AMSOIL sees its Commitment to Excellence as a historical responsibility, and A.J. Amatuzio’s energy and vision continue to drive the company forward....inspired by aerospace technology

Amsoil Diesel Oil

SYNTHETIC OIL BENEFITS TRANSPORT INDUSTRY

Continual cost pressures on transport operators have prompted many to seriously consider using 100 percent synthetic lubricants in their trucks.

Amsoil, which produced the world’s first API-qualified synthetic motor oil in 1972, says oils such as its (DEO) are an ideal solution for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines.

“Built with the latest additive and synthetic base oil technology, Amsoil premium synthetic 5W-40 diesel oil exceeds the higher performance demands of modern engines”, said Laurie Hyland of Australian distributor, Enginecare Systems Australasia.

“This oil has been developed for diesel engines used in commercial fleets and industrial applications. It withstands the stress of heat, soot and acids to help prevent deposits, wear and corrosion. It is wax-free with a broad viscosity range to provide exceptional cold-weather starting and high temperature protection. It resists breakdown and offers maximum fuel efficiency over extended drain intervals.

A low-sulfated ash formulation is claimed to exceed the requirements for low-emission quality diesel oil. It is compatible with all exhaust treatment devices and is designed to extend the service life of diesel particulate filters (DPF).

Other benefits include lower volatility (burn-off) than conventional petroleum oils; natural resistance to soot contamination and a heavy fortification of detergent/ dispersant additives that keeps soot particles suspended independently, helping prevent the formation of larger wear-causing particles.

Amsoil DEO, DME and AME lubricants are supplied in 208 litre drums and 19 litre twin pack cartons, holding two 8.5 litre containers.

Filtration Systems

By-Pass filtration kits

BMK-11
BMK-12
BMK-13
BME-90
BME-100
BME-110

Product description

The AMSOIL By-Pass Oil Filter provides the best possible filtration protection against wear, oil degradation, rust and corrosion. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL By-Pass Filter operates by filtering oil on a “partial-flow” basis. It draws approximately 10 percent of the oil pump’s capacity at any one time and straps the extremely small, wear-causing contaminants and water that full-flow filters can’t remove. The AMSOIL By-Pass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

By-Pass filtration kits

BMK-11

Application: Auto/Light Truck and Marine (Dodge w/Cummins 2004 and later)

Suggested Filter Elements: EaBP-90, 100 and 110

Optional Components: BP-44, 45, 67 and 89

Descritption: Add-on by-pass filter kit. Includes mount, hose and fittings. Order filter separately.

BMK-12

Application: Large truck, stationary engines, compressors, forestry, agriculture, marine, mining

Suggested Filter Elements: (2) EaBP-90 or (2) EaBP-100 or (2) EaBP-110

Optional Components: All hoses and fittings Dual mount only, does not include filters, hose or fittings.

Descritption: Crankcase capacity / suggested filters - 15 to 18 qt. = (2) EaBP-90, 18 to 30 qt .= (2) EaBP-100, 30 to 42 qt. = (2) EaBP-110

BMK-13

Application: Auto/Light Truck Marine

Suggested Filter Elements: EaBP-90, 100 and 110 EaO-10, 34, 42, 96, 15* or 26*

Optional Components: BK-11, 12 and 13

Descritption: Relocate full-flow with by-pass filter. Includes mount, hose and fittings. Order filters separately.

Typical Installation Diagram for BMK-11 & BMK-12 Kits.

bypass_dia_300px
Typical Installation Diagram for BMK-11 & BMK-12 Kits.

Reduce engine soot - clean air intake filtration - diesel preventive maintenance - mine equipment maintenance - extend machinery life - oil quality enhancement - synthetic lubricants – oil cleaning centrifuge – air pre cleaners – oil filtration– truck engines – power generation – pump engines – emission control– trucks – transport industry- lubrication – fuel additives – metal conditioning

Other Amsoil Products

WORLD LEADING SYNTHETIC LUBRICANT

Amsoil is a highly respected name in high performance engine lubricants. We import bulk oil for transport, mining, earthmoving equipment, industrial and marine applications.

Amsoil was established in the mid-1960s by Al Amatuzio, an award-winning jet fighter pilot who gained a solid appreciation for the extraordinary lubricants that protected the engines of the jets he flew.

During an intense period of research and development he assembled the industry's most knowledgeable chemists to formulate the world’s first synthetic motor oil to meet American Petroleum Institute service requirements. The first Amsoil synthetic motor oil appeared on the market in 1972.

Amsoil still leads the way in synthetic oils. By using Amsoil’s sub-micron bypass filtration, its premium lubricants have been proven to substantially extend oil change intervals on diesel engines many times longer than conventional engine oils

Transmission and Gear Oils

WORLD LEADING SYNTHETIC LUBRICANT

Amsoil is a highly respected name in high performance engine lubricants. We import bulk oil for transport, mining, earthmoving equipment, industrial and marine applications.

Transmission and Gear Oils

SVG - SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-90
SVO - SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-140
ATF - Synthetic Universal Automatic Transmission Fluid
ATH - Synthetic Tractor Hydraulic/Transmission Oil SAE 5W-30
AGR - 75W-90 Synthetic Gear Lube
AGL - Synthetic Gear Lube SAE 80W-90
MTG - Synthetic Manual Transmission and Transaxle Gear Lube 75W-90 API GL-4
CTL - Synthetic Powershift Transmission Fluid SAE 50

Transmission and Gear Oils

SVG

SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-90

Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard working vehicles.

AMSOIL SEVERE GEAR® Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL SEVERE GEAR® Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring. AMSOIL SEVERE GEAR® lubricants help prevent “thermal runaway” — a phenomenon caused by a lubricant’s inability to control friction and increased heat under high-stress conditions. By controlling thermal runaway, AMSOIL SEVERE GEAR® Synthetic EP Lubricants inhibit rapid lubricant degradation and component damage. Equipment runs better and lasts longer with AMSOIL SEVERE GEAR® Synthetic EP Lubricants.

SVO

SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-140

Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard working vehicles.

ATF

Synthetic Universal Automatic Transmission Fluid

Recommended for most automatic transmissions. Eliminates confusion, mis-applications and lowers inventory requirements. Delivers maximum protection and is excellent in demanding environments such as towing, hauling or commercial use. Lasts longer than conventional oil for extended drain intervals. Saves time and costly maintenance expenses. Superior hot and cold weather performance. Improves efficiency and typically reduces operating temperatures by as much as 50°F.

ATH

Synthetic Tractor Hydraulic/Transmission Oil

SAE 5W-30

Formulated for "All Weather" Performance in Farm and Commercial Equipment.

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is an “all weather” Universal Tractor Transmission Oil (UTTO) engineered to meet the tough demands of heavy-duty, hydraulic-powered farm and commercial equipment. Its unique formulation of synthetic base stocks and additives effectively reduces wear, resists heat, protects against rust and extends fluid and equipment service life. Synthetic Tractor Hydraulic/Transmission Oil is recommended for extended oil drains based on oil analysis.

AGR

Synthetic Gear Lube SAE 75W-90

AMSOIL submitted its 75W-90 Synthetic Gear Lube (AGR) and Valvoline 75W-90 Gear Lube to an independent laboratory for quality comparison tests. The gear lubes were tested according to ASTM testing procedures in several critical performance areas, including oxidation resistance, viscosity retention and cold temperature fluidity. Oxidation resistance was measured using the L-60-1 Thermal Oxidation Stability Test, viscosity retention was measured using the KRL Shear Stability Test and cold temperature fluidity was measured using the Brookfield Viscosity Test. Additional load carrying, wear, extreme pressure and scoring protection tests were performed exclusively on AMSOIL 75W-90 Synthetic Gear Lube using the L-37 High Torque Axle Test and the L-42 High Speed Axle Test.

AGL

Synthetic Gear Lube SAE 80W-90

High quality replacement for applications specifying SAE 80W-90 conventional gear lube. Synthetic construction provides improved cold flow properties, high viscosity index and heat resistance. Contains an over treat of high quality additives, exceeding the minimum standards. Provides excellent wear protection and long equipment life.

MTG

Synthetic Manual Transmission and Transaxle Gear Lube 75W-90 API GL-4

Specifically formulated for the most demanding manual transmission and transaxle applications. AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube (MTG) is a premium blend of the finest synthetic base oils and advanced, high-performance additives. It is formulated specifically for maximum protection in the most demanding manual transmission and transaxle applications where an extreme pressure GL-4 gear lube is specified, including those where high horsepower/high torque engines and towing or heavy loads increase transmission stress.

CTL

Synthetic Powershift Transmission Fluid SAE 50

Advanced Formulation for Powershift and Manual Transmissions, Wet Brakes and Final Drives

Specifically formulated for heavy-duty powershift transmissions. Provides outstanding friction performance for enhanced clutch engagement. Formulated to prevent slippage and glazing. Shear stable and antiwear fortified. Protects gears and bearings. Resists high temperature oxidation, varnish and sludge formation. Superb cold flow properties. Extended drain interval capable. Recommended for heavy-duty service found in commercial and earth moving applications as well as lighter duty transmissions requiring the listed specifications.

Motor Oils

Petrol engine

ATM - 100% Synthetic 10W-30
AMO - Synthetic High Performance 10W-40
ARO - Synthetic High Performance 20W-50
AFL - European Car Formula Synthetic 5W-40
TRO - Series 2000 Synthetic 20W-50 Racing Oil

Diesel

AME - Synthetic Heavy-Duty Diesel & Marine Motor Oil SAE 15W-40
HDD - Series 3000 Synthetic 5W-30 Heavy-Duty

Two stroke

HPI - HP Injector Synthetic 2-Cycle Oil
TDR - DOMINATOR™ Synthetic 2-Cycle Racing Oil
AIT - INTERCEPTOR™ High Performance Synthetic 2-Cycle Oil
ATP - Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil
ATO - Saber™ Outboard Synthetic 2-Cycle Oil

Petrol Engine

ATM

100% Synthetic 10W-30 Motor Oil (ATM)

AMSOIL 100% Synthetic 10W-30 Motor Oil (ATM) delivers extraordinary lubrication in all types of automotive gasoline engines. By combining the industry premier synthetic technology with AMSOIL premium additives, AMSOIL ATM exceeds the higher performance demands of modern engines. It withstands the stress of higher horsepower, higher heat and complicated emission control systems. AMSOIL Synthetic 10W-30 Motor Oil consistently outperforms competitive conventional and synthetic motor oils. It delivers long-lasting performance and protection.

AMO

SAE 10W-40 Synthetic High Performance Motor Oil (AMO)

Formulated for use in both gasoline and diesel engines. Offers multi-functionality and excellent wear protection. Ideal for applications where the extra protection of a higher viscosity oil is desired. Excellent for motor homes and older vehicles, as well as most types of modern equipment. Also compatible for use in motorcycles.

Performance specifications include: API SL/CF, CI-4 Plus

ARO

SAE 20W-50 Synthetic High Performance Motor Oil (ARO)

Performance specifications include:

API SL/CF, CI-4 Plus

AFL

European Car Formula

Synthetic 5W-40 Motor Oil (AFL)

AMSOIL European Car Formula Synthetic 5W-40 Motor Oil is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred oil for virtually all European automobiles, especially turbo charged models. It is the only oil in North America to be recommended for the latest specifications of all three major European automakers - Volkswagen (Audi), BMW and Mercedes-Benz and the latest North American API specifications.

TRO

Series 2000 Synthetic 20W-50 Racing Oil (TRO)

The number one choice for racers of all types of vehicles. Special synthetic base stock blend and advanced additive package provides up to four times the wear protection of other motor oils. Reduces friction for quicker engine response and increased horsepower.Engines in race cars, high-performance street cars, ATVs and motorhomes face high temperatures, vigorous engine speeds or heavy loads, each a potent stressor. AMSOIL Series 2000 20W-50 Synthetic Racing Oil offers unmatched protection for engines facing tough operating conditions.

Diesel Oils

AME

Synthetic Heavy-Duty Diesel & Marine Motor Oil SAE 15W-40

Engineered for all types of diesel engines with an emphasis on modern, low emission heavy duty diesel engines. High 12 TBN controls acids from combustion blow-by and EGR. High levels of detergency and dispersancy additives control soot thickening, oxidation and wear. Resists bore polishing, deposit formation and ring sticking. Provides clean engine performance. Extended drain capabilities reduce downtime and motor oil expenses.

HDD

Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil

AMSOIL Series 3000 100% Synthetic 5W-30 Diesel Oil (HDD) delivers extraordinary lubrication in both diesel and gasoline engines found in commercial, fleet and personal vehicles. By combining the industry’s premier synthetic technology with AMSOIL premium additives, AMSOIL HDD exceeds the higher performance demands of modern engines. It withstands the stress of higher heat, higher acid levels and excessive soot loading found in EGR equipped engines. AMSOIL Series 3000 Synthetic 5W-30 Diesel Oil consistently outperforms conventional and synthetic diesel oils for long-lasting performance and protection.

Two Stroke

HPI

HP Injector Synthetic 2-Cycle Oil

Excellent for all outboard motors with a performance emphasis on modern direct fuel injected (DFI) technology. Also recommended for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Injector use or 50:1 premix.

NMMA TC-W3, API TC

TDR

DOMINATOR™ Synthetic 2-Cycle Racing Oil

This racing two-cycle oil has a performance emphasis toward high horsepower and modified racing or trail motors. Examples include snowmobiles, motorcycles, ATVs, personal watercraft, go-carts and outboard motors*. Contains higher viscosity oils for best overall protection. Contains additives for higher operating temperatures. Injector use or 50:1 premix.

JASO FC, API TC

* Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.

AIT

INTERCEPTOR™ High Performance Synthetic 2-Cycle Oil

A high-performance two-cycle oil with a performance emphasis on exhaust power vales. Excellent for all types of snowmobiles, motorcycles, personal watercraft, ATVs and jet boats. Contains high levels of detergent additives to prevent valve sticking. High quality replacement for manufacturer branded oils. Injector use or 50:1 premix. JASO FC, API TC

ATP

Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil

AMSOIL Saber™ Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

ISO-L-EGD, JASO FD, API TC

ATO

Saber™ Outboard Synthetic 2-Cycle Oil

AMSOIL Saber Outboard is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

ISO-L-EGD, JASO FC, API TC

Motorcycle Products

grant-factoryconn2008-cudby-233.jpg - 69.45 Kb

WORLD LEADING SYNTHETIC LUBRICANT

Amsoil is a highly respected name in high performance engine lubricants. We import bulk oil for transport, mining, earthmoving equipment, industrial and marine applications.

Engine oils

MCV- SAE 20W-50 Synthetic Motorcycle Oil
MCF - SAE 10W-40 Synthetic Motorcycle Oil

Transmission oils

SVG - SEVERE GEART Synthetic Extreme Pressure (EP) Lubricant 75W-90

Two stroke oils

TDR - DOMINATOR™ Synthetic 2-Cycle Racing Oil (TDR)
HPI - HP Injector Synthetic 2-Cycle Oil (HPI)

Suspension fluid

STL - Shock Therapy Suspension Fluid #5 Light (STL)
STM - Shock Therapy Suspension Fluid #10 Medium

Engine Oils

MCV

SAE 20W-50 Synthetic Motorcycle Oil

For those who demand the best. Multi-functional, and fulfills the requirements of both domestic and foreign motorcycles. Excellent performance in air-cooled motorcycle engines due to high heat resistance, anti-wear additives and oxidation resistance. Recommended for engines, transmissions and the primary chaincase. Absolutely shear stable and will not thin out from mechanical activity. Contains special anti-rust agents for suprior rust protection, and contains no friction modifiers for excellent wet clutch performance. Not recommended for shaft drive hypoid gears or where an API-GL-4 or GL-5 gear oil is required. Performance specifications include: API SG, SL/CF; JASO MA/MA2; API GL-1

MCF

SAE 10W-40 Synthetic Motorcycle Oil

AMSOIL Synthetic Motorcycle Oils have been reformulated with new high performance additive technology that provides even greater multi-functional benefits for the special requirements of motorcycle applications. These independent and exclusive new AMSOIL formulations provide second-to-none viscosity protection for hot-running American and foreign motorcycle engines, transmissions and primary chaincases. Performance specifications include:API SG, SL/CF; JASO MA/MA-2; API GL-1

Transmission Oils

SVG

SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-90

Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard working vehicles.

Two Stoke Oils

TDR

DOMINATOR™ Synthetic 2-Cycle Racing Oil

* Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.

HPI

HP Injector Synthetic 2-Cycle Oil (HPI)

NMMA TC-W3, API TC

Suspension Fluid

STL

Shock Therapy Suspension Fluid #5 Light

Control friction, heat, wear, foaming and scuffing in suspension components. High viscosity index and shear stability performance control shock fade and inconsistent dampening in temperature extremes.

STM

Shock Therapy Suspension Fluid #10 Medium